|
|
Fittings and Hardware
HDI offers complimentary fittings, hardware and brackets to insure that every installation is fully engineered for a fast, professional installation.
|
 |
F-VCB-3, F-VC-4
Fitting, Victaulic Coupling, 3 Inch and 4 inch.
This fitting is used to connect fittings with Victaulic grooves, such as the top Victaulic, T-V-3, or bottom Victauic elbows, B-V-3, B-VX-3 or B-V-4 to other fittings with a Victaulic groove fittings such as SPS crossovers, F-XO-3, F-XOX-3 or F-XO-4, or other plumbing components connecting the pump system to the vehicles payload tanks.
|
|
F-WDM-3 & F-WDM-4
Fitting, Wet-Dry Valve, Metered, 3 Inch/4 Inch.
Industry standard indexed/metered aluminium Wet-Dry For applications where extra flow control is needed. Use with any TTMA fitting including HDI round flange elbow, B-RF-3 or SPS crossovers, F-XO-3, F-XOX-3 or F-XO-4.
|
 |
F-FKIT-3 & F-FKIT-4
Fitting, Kit, Male Kamlock, Gaskets and Cap, 3 Inch/4 inch.
Complete fitting kit for the end of a crossover, F-XO-3 or F-XOX-3, round flange elbow, B-RF-3, B-RF-4 or F-XO-4. Use with SPS Wet-Dry valves, F-WDM-3. Each kit includes a male Kamlock, two gaskets and a cap. |
 |
F-KE-3
Fitting, Kamlock, Female/Male Elbow, 90 Degree, 3 inch.
Use this optional fitting with SPS T-MK-3, Male Kamlock top fitting to provide a flexible horizontal connection point for hoses equipped with standard 3 inch female cam and groove fittings. Use SPS F-KCAP-3, 3 inch Kamlock cap fitting to cover this fitting during transport. |
 |
HW-BXO-BRKT
Hardware, Bottom crossover bracket.
Heavy duty, powder coated bracket designed specifically for supporting SPS's bottom mounted crossovers. Use one bracket for inside mounted crossovers (vane pumps only). Use two brackets for outside mounted crossovers, vane or gear pump systems. Mount without drilling the frame by using one (1) Chassis Grabber, Model 100311/100345, Left, UN1/UN2. |
 |
HW-TXO-BRKT4
Hardware, Top universal crossover bracket (Pair).
Heavy duty, powder coated brackets designed specifically for supporting SPS's top mounted crossovers. Use SPS crossover,
F-XOX-3 or F-XOX-4, a top Victaulic, T-V-3 and connect with Victaulic coupling, F-VC-3. Secure top crossover to top crossover brackets with SPS straps (pair), HW-STRAP-3 or HW-STRAP-4. |
 |
HW-STRAP-3 & HW-STRAP-4
Hardware, Strap (Pair), 3 Inch/4 Inch.
These straps are designed to mount crossover tubes, F-XO-3, F-XOX-3 or F-XO-4 to crossover brackets, both top or bottom brackets. Each strap kit contains a pair of straps, enough to mount one crossover. |
 |
BI-KT, Brake Interlock Kit
Install the SPS Brake Interlock Kit in the airline between the emergency brake balance valve and the supply line. The Brake Interlock Kit prevents the truck from being driven when the PTO is engaged. |
|
